[ 7.507677] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 7.507700] Linux version 5.10.110 (root@george-VirtualBox) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #23 SMP Tue Jun 13 09:09:46 CST 2023 [ 7.512672] Machine model: RK3588S CoolPi 4B Board DSI ENABLE [ 7.512786] efi: UEFI not found. [ 7.514630] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB [ 7.514669] Reserved memory: created CMA memory pool at 0x00000004ff800000, size 8 MiB [ 7.514673] OF: reserved mem: initialized node cma, compatible id shared-dma-pool [ 7.734992] Zone ranges: [ 7.734998] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 7.735008] DMA32 empty [ 7.735013] Normal [mem 0x0000000100000000-0x00000004ffffffff] [ 7.735018] Movable zone start for each node [ 7.735020] Early memory node ranges [ 7.735024] node 0: [mem 0x0000000000200000-0x00000000083fffff] [ 7.735028] node 0: [mem 0x0000000009400000-0x00000000efffffff] [ 7.735034] node 0: [mem 0x0000000100000000-0x00000003fbffffff] [ 7.735041] node 0: [mem 0x00000003fc500000-0x00000003ffefffff] [ 7.735044] node 0: [mem 0x00000004f0000000-0x00000004ffffffff] [ 7.735050] Initmem setup node 0 [mem 0x0000000000200000-0x00000004ffffffff] [ 7.735056] On node 0 totalpages: 4188160 [ 7.735061] DMA zone: 15288 pages used for memmap [ 7.735063] DMA zone: 0 pages reserved [ 7.735067] DMA zone: 978432 pages, LIFO batch:63 [ 7.735071] Normal zone: 50152 pages used for memmap [ 7.735074] Normal zone: 3209728 pages, LIFO batch:63 [ 7.828723] On node 0, zone Normal: 256 pages in unavailable ranges [ 7.828858] psci: probing for conduit method from DT. [ 7.828867] psci: PSCIv1.1 detected in firmware. [ 7.828869] psci: Using standard PSCI v0.2 function IDs [ 7.828875] psci: Trusted OS migration not required [ 7.828880] psci: SMC Calling Convention v1.2 [ 7.829261] percpu: Embedded 32 pages/cpu s91928 r8192 d30952 u131072 [ 7.829300] pcpu-alloc: s91928 r8192 d30952 u131072 alloc=32*4096 [ 7.829305] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 7.829422] Detected VIPT I-cache on CPU0 [ 7.829459] CPU features: detected: GIC system register CPU interface [ 7.829463] CPU features: detected: Virtualization Host Extensions [ 7.829471] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 7.829482] alternatives: patching kernel code [ 7.831667] Built 1 zonelists, mobility grouping on. Total pages: 4122720 [ 7.831675] Kernel command line: root=LABEL=writable rw rootfstype=ext4 console=ttyS0,115200n81 quiet splash plymouth.ignore-serial-consoles vt.global_cursor_default=1 irqchip.gicv3_pseudo_nmi=0 net.ifnames=0 rtleth=ethaddr:e6:22:d0:dd:bc:6f [ 7.833406] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 7.834178] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 7.834185] mem auto-init: stack:off, heap alloc:off, heap free:off [ 7.840505] software IO TLB: mapped [mem 0x00000000e7150000-0x00000000eb150000] (64MB) [ 7.962272] Memory: 16307804K/16752640K available (22016K kernel code, 3480K rwdata, 6564K rodata, 7360K init, 617K bss, 436644K reserved, 8192K cma-reserved) [ 7.962292] random: get_random_u64 called from __kmem_cache_create+0x38/0x520 with crng_init=0 [ 7.962454] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 7.962490] ftrace: allocating 64485 entries in 252 pages [ 8.049910] ftrace: allocated 252 pages with 6 groups [ 8.050177] rcu: Hierarchical RCU implementation. [ 8.050181] rcu: RCU event tracing is enabled. [ 8.050184] Rude variant of Tasks RCU enabled. [ 8.050187] Tracing variant of Tasks RCU enabled. [ 8.050192] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 8.055456] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 8.057223] GICv3: GIC: Using split EOI/Deactivate mode [ 8.057229] GICv3: 480 SPIs implemented [ 8.057231] GICv3: 0 Extended SPIs implemented [ 8.057261] GICv3: Distributor has no Range Selector support [ 8.057268] GICv3: 16 PPIs implemented [ 8.057311] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000 [ 8.057412] ITS [mem 0xfe640000-0xfe65ffff] [ 8.057457] ITS@0x00000000fe640000: allocated 8192 Devices @100110000 (indirect, esz 8, psz 64K, shr 0) [ 8.057480] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100120000 (flat, esz 2, psz 64K, shr 0) [ 8.057487] ITS: using cache flushing for cmd queue [ 8.057514] ITS [mem 0xfe660000-0xfe67ffff] [ 8.057553] ITS@0x00000000fe660000: allocated 8192 Devices @100140000 (indirect, esz 8, psz 64K, shr 0) [ 8.057574] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100150000 (flat, esz 2, psz 64K, shr 0) [ 8.057580] ITS: using cache flushing for cmd queue [ 8.057687] GICv3: using LPI property table @0x0000000100160000 [ 8.057800] GIC: using cache flushing for LPI property table [ 8.057807] GICv3: CPU0: using allocated LPI pending table @0x0000000100170000 [ 8.189894] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 8.189902] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 8.189911] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 8.190692] Console: colour dummy device 80x25 [ 8.190721] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) [ 8.190730] pid_max: default: 32768 minimum: 301 [ 8.190911] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 8.190943] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 8.192454] rcu: Hierarchical SRCU implementation. [ 8.193204] Platform MSI: msi-controller@fe640000 domain created [ 8.193218] Platform MSI: msi-controller@fe660000 domain created [ 8.193449] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created [ 8.193464] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created [ 8.193543] EFI services will not be available. [ 8.193808] smp: Bringing up secondary CPUs ... [ 8.201982] CPU features: detected: Spectre-v4 [ 8.201985] CPU features: detected: Spectre-BHB [ 8.201987] Detected PIPT I-cache on CPU1 [ 8.202004] GICv3: CPU1: found redistributor 400 region 0:0x00000000fe700000 [ 8.202012] GICv3: CPU1: using allocated LPI pending table @0x0000000100180000 [ 8.202038] CPU1: Booted secondary processor 0x0000000400 [0x414fd0b0] [ 8.210214] Detected PIPT I-cache on CPU2 [ 8.210227] GICv3: CPU2: found redistributor 500 region 0:0x00000000fe720000 [ 8.210235] GICv3: CPU2: using allocated LPI pending table @0x0000000100190000 [ 8.210258] CPU2: Booted secondary processor 0x0000000500 [0x414fd0b0] [ 8.218430] Detected PIPT I-cache on CPU3 [ 8.218442] GICv3: CPU3: found redistributor 600 region 0:0x00000000fe740000 [ 8.218449] GICv3: CPU3: using allocated LPI pending table @0x00000001001a0000 [ 8.218471] CPU3: Booted secondary processor 0x0000000600 [0x414fd0b0] [ 8.226624] Detected PIPT I-cache on CPU4 [ 8.226636] GICv3: CPU4: found redistributor 700 region 0:0x00000000fe760000 [ 8.226643] GICv3: CPU4: using allocated LPI pending table @0x00000001001b0000 [ 8.226665] CPU4: Booted secondary processor 0x0000000700 [0x414fd0b0] [ 8.234826] Detected VIPT I-cache on CPU5 [ 8.234844] GICv3: CPU5: found redistributor 100 region 0:0x00000000fe6a0000 [ 8.234857] GICv3: CPU5: using allocated LPI pending table @0x00000001001c0000 [ 8.234891] CPU5: Booted secondary processor 0x0000000100 [0x412fd050] [ 8.243102] Detected VIPT I-cache on CPU6 [ 8.243120] GICv3: CPU6: found redistributor 200 region 0:0x00000000fe6c0000 [ 8.243133] GICv3: CPU6: using allocated LPI pending table @0x00000001001d0000 [ 8.243166] CPU6: Booted secondary processor 0x0000000200 [0x412fd050] [ 8.251345] Detected VIPT I-cache on CPU7 [ 8.251364] GICv3: CPU7: found redistributor 300 region 0:0x00000000fe6e0000 [ 8.251377] GICv3: CPU7: using allocated LPI pending table @0x00000001001e0000 [ 8.251409] CPU7: Booted secondary processor 0x0000000300 [0x412fd050] [ 8.251491] smp: Brought up 1 node, 8 CPUs [ 8.251504] SMP: Total of 8 processors activated. [ 8.251509] CPU features: detected: Privileged Access Never [ 8.251511] CPU features: detected: User Access Override [ 8.251515] CPU features: detected: 32-bit EL0 Support [ 8.251518] CPU features: detected: Common not Private translations [ 8.251521] CPU features: detected: RAS Extension Support [ 8.251525] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 8.251528] CPU features: detected: CRC32 instructions [ 8.251530] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 8.251535] CPU features: detected: RCpc load-acquire (LDAPR) [ 8.251601] CPU: All CPU(s) started at EL2 [ 8.255648] devtmpfs: initialized [ 8.262527] Trying to unpack rootfs image as initramfs... [ 8.262538] Registered cp15_barrier emulation handler [ 8.262544] Registered setend emulation handler [ 8.262607] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 8.262612] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 8.262757] pinctrl core: initialized pinctrl subsystem [ 8.262936] DMI not present or invalid. [ 8.263086] NET: Registered protocol family 16 [ 8.276698] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 8.276795] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 8.276826] audit: initializing netlink subsys (disabled) [ 8.276897] audit: type=2000 audit(0.086:1): state=initialized audit_enabled=0 res=1 [ 8.277357] thermal_sys: Registered thermal governor 'fair_share' [ 8.277359] thermal_sys: Registered thermal governor 'step_wise' [ 8.277360] thermal_sys: Registered thermal governor 'user_space' [ 8.277362] thermal_sys: Registered thermal governor 'power_allocator' [ 8.277470] thermal thermal_zone1: power_allocator: sustainable_power will be estimated [ 8.277493] thermal thermal_zone2: power_allocator: sustainable_power will be estimated [ 8.277512] thermal thermal_zone3: power_allocator: sustainable_power will be estimated [ 8.277533] thermal thermal_zone4: power_allocator: sustainable_power will be estimated [ 8.277555] thermal thermal_zone5: power_allocator: sustainable_power will be estimated [ 8.277575] thermal thermal_zone6: power_allocator: sustainable_power will be estimated [ 8.277600] cpuidle: using governor menu [ 8.277671] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 8.277765] ASID allocator initialised with 65536 entries [ 8.278499] ramoops: dmesg-0 0x20000@0x0000000000110000 [ 8.278524] ramoops: console 0x80000@0x0000000000130000 [ 8.278534] ramoops: pmsg 0x50000@0x00000000001b0000 [ 8.278571] printk: console [ramoops-1] enabled [ 8.278573] pstore: Registered ramoops as persistent store backend [ 8.278575] ramoops: using 0xf0000@0x110000, ecc: 0 [ 8.310890] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000 [ 8.311028] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000 [ 8.311156] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000 [ 8.311297] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000 [ 8.311442] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000 [ 8.311460] rockchip-pinctrl pinctrl: probed pinctrl [ 8.317187] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 8.317190] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 8.317192] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 8.317194] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 8.352411] Freeing initrd memory: 8568K [ 8.373282] raid6: neonx8 gen() 5629 MB/s [ 8.430000] raid6: neonx8 xor() 4444 MB/s [ 8.486721] raid6: neonx4 gen() 5563 MB/s [ 8.543438] raid6: neonx4 xor() 4650 MB/s [ 8.600158] raid6: neonx2 gen() 5374 MB/s [ 8.656877] raid6: neonx2 xor() 4192 MB/s [ 8.713598] raid6: neonx1 gen() 4383 MB/s [ 8.770317] raid6: neonx1 xor() 3677 MB/s [ 8.827045] raid6: int64x8 gen() 2638 MB/s [ 8.883761] raid6: int64x8 xor() 1563 MB/s [ 8.940475] raid6: int64x4 gen() 2973 MB/s [ 8.997195] raid6: int64x4 xor() 1551 MB/s [ 9.053920] raid6: int64x2 gen() 2521 MB/s [ 9.110639] raid6: int64x2 xor() 1360 MB/s [ 9.167363] raid6: int64x1 gen() 2067 MB/s [ 9.224080] raid6: int64x1 xor() 1087 MB/s [ 9.224082] raid6: using algorithm neonx8 gen() 5629 MB/s [ 9.224084] raid6: .... xor() 4444 MB/s, rmw enabled [ 9.224086] raid6: using neon recovery algorithm [ 9.224507] vcc5v0_sys: supplied by vcc12v_dcin [ 9.224598] vcc5v0_usbdcin: supplied by vcc12v_dcin [ 9.224687] vcc5v0_usb: supplied by vcc5v0_usbdcin [ 9.224838] vcc5v0_host: supplied by vcc5v0_sys [ 9.224947] vcc5v0_otg: supplied by vcc5v0_sys [ 9.225028] vcc_1v1_nldo_s3: supplied by vcc5v0_sys [ 9.225216] iommu: Default domain type: Translated [ 9.225268] rk_iommu fdab9000.iommu: version = 2 [ 9.225582] rk_iommu fdb50800.iommu: version = 2 [ 9.225771] rk_iommu fdb60f00.iommu: version = 2 [ 9.225904] rk_iommu fdb70f00.iommu: version = 2 [ 9.226029] rk_iommu fdb90480.iommu: version = 2 [ 9.226175] rk_iommu fdba0800.iommu: version = 2 [ 9.226316] rk_iommu fdba4800.iommu: version = 2 [ 9.226458] rk_iommu fdba8800.iommu: version = 2 [ 9.226602] rk_iommu fdbac800.iommu: version = 2 [ 9.226745] rk_iommu fdbb0800.iommu: version = 2 [ 9.226884] rk_iommu fdbdf000.iommu: version = 2 [ 9.227088] rk_iommu fdbef000.iommu: version = 2 [ 9.227309] rk_iommu fdc38700.iommu: version = 2 [ 9.227550] rk_iommu fdc48700.iommu: version = 2 [ 9.227716] rk_iommu fdcb7f00.iommu: version = 2 [ 9.227852] rk_iommu fdce0800.iommu: version = 2 [ 9.227929] rk_iommu fdd97e00.iommu: version = 2 [ 9.228162] SCSI subsystem initialized [ 9.228173] libata version 3.00 loaded. [ 9.228225] usbcore: registered new interface driver usbfs [ 9.228235] usbcore: registered new interface driver hub [ 9.228246] usbcore: registered new device driver usb [ 9.228282] mc: Linux media interface: v0.10 [ 9.228288] videodev: Linux video capture interface: v2.00 [ 9.228304] pps_core: LinuxPPS API ver. 1 registered [ 9.228306] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 9.228310] PTP clock support registered [ 9.228492] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 9.228522] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 9.229275] Advanced Linux Sound Architecture Driver Initialized. [ 9.229449] Bluetooth: Core ver 2.22 [ 9.229457] NET: Registered protocol family 31 [ 9.229458] Bluetooth: HCI device and connection manager initialized [ 9.229461] Bluetooth: HCI socket layer initialized [ 9.229463] Bluetooth: L2CAP socket layer initialized [ 9.229468] Bluetooth: SCO socket layer initialized [ 9.230736] rockchip-cpuinfo cpuinfo: SoC : 35881000 [ 9.230739] rockchip-cpuinfo cpuinfo: Serial : 8ae4b9360bb609a4 [ 9.230946] clocksource: Switched to clocksource arch_sys_counter [ 9.495016] NET: Registered protocol family 2 [ 9.495175] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 9.498785] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 9.498921] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 9.499569] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 9.500238] TCP: Hash tables configured (established 131072 bind 65536) [ 9.500275] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 9.500512] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 9.500789] NET: Registered protocol family 1 [ 9.500966] RPC: Registered named UNIX socket transport module. [ 9.500968] RPC: Registered udp transport module. [ 9.500969] RPC: Registered tcp transport module. [ 9.500971] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.501190] NET: Registered protocol family 44 [ 9.501313] PCI: CLS 0 bytes, default 64 [ 9.501782] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 9.502174] kvm [1]: IPA Size Limit: 40 bits [ 9.502183] kvm [1]: GICv3: no GICV resource entry [ 9.502185] kvm [1]: disabling GICv2 emulation [ 9.502187] kvm [1]: GIC system register CPU interface enabled [ 9.502283] kvm [1]: vgic interrupt IRQ9 [ 9.502407] kvm [1]: VHE mode initialized successfully [ 9.503642] Initialise system trusted keyrings [ 9.503684] workingset: timestamp_bits=46 max_order=22 bucket_order=0 [ 9.505438] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 9.505677] NFS: Registering the id_resolver key type [ 9.505684] Key type id_resolver registered [ 9.505685] Key type id_legacy registered [ 9.505697] ntfs: driver 2.1.32 [Flags: R/W]. [ 9.505780] fuse: init (API version 7.32) [ 9.505870] SGI XFS with security attributes, no debug enabled [ 9.526401] NET: Registered protocol family 38 [ 9.526405] xor: measuring software checksum speed [ 9.527810] 8regs : 7039 MB/sec [ 9.528975] 32regs : 8453 MB/sec [ 9.529844] arm64_neon : 11371 MB/sec [ 9.529846] xor: using function: arm64_neon (11371 MB/sec) [ 9.529849] Key type asymmetric registered [ 9.529852] Asymmetric key parser 'x509' registered [ 9.529863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 9.529931] io scheduler mq-deadline registered [ 9.529935] io scheduler kyber registered [ 9.529936] blkcg_policy_register: BLKCG_MAX_POLS too small [ 9.530362] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully! [ 9.530565] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully! [ 9.535360] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success [ 9.536879] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node [ 9.536895] rk-pcie fe190000.pcie: no vpcie3v3 regulator found [ 9.537004] pwm-backlight backlight: supply power not found, using dummy regulator [ 9.537214] rk-pcie fe190000.pcie: missing legacy IRQ resource [ 9.537229] rk-pcie fe190000.pcie: IRQ msi not found [ 9.537236] iep: Module initialized. [ 9.537241] rk-pcie fe190000.pcie: use outband MSI support [ 9.537246] rk-pcie fe190000.pcie: Missing *config* reg space [ 9.537260] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges: [ 9.537262] mpp_service mpp-srv: 42c7305fbcbc author: Chandler Chen 2022-12-15 video: rockchip: mpp: rkvdec: add task timing & timeout for rkvdec [ 9.537264] mpp_service mpp-srv: probe start [ 9.537283] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000 [ 9.537295] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 9.537307] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000 [ 9.537320] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000 [ 9.537345] rk-pcie fe190000.pcie: Missing *config* reg space [ 9.537376] rk-pcie fe190000.pcie: invalid resource [ 9.538239] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1 [ 9.538426] mpp_vdpu2 fdb50400.vdpu: probe device [ 9.538514] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0 [ 9.538518] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0 [ 9.538585] mpp_vdpu2 fdb50400.vdpu: probing finish [ 9.538737] mpp_vepu2 jpege-ccu: probing start [ 9.538740] mpp_vepu2 jpege-ccu: probing finish [ 9.538830] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5 [ 9.538959] mpp_vepu2 fdba0000.jpege-core: probing start [ 9.539036] mpp_vepu2 fdba0000.jpege-core: attach ccu success [ 9.539098] mpp_vepu2 fdba0000.jpege-core: probing finish [ 9.539176] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6 [ 9.539300] mpp_vepu2 fdba4000.jpege-core: probing start [ 9.539372] mpp_vepu2 fdba4000.jpege-core: attach ccu success [ 9.539434] mpp_vepu2 fdba4000.jpege-core: probing finish [ 9.539500] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7 [ 9.539623] mpp_vepu2 fdba8000.jpege-core: probing start [ 9.539689] mpp_vepu2 fdba8000.jpege-core: attach ccu success [ 9.539748] mpp_vepu2 fdba8000.jpege-core: probing finish [ 9.539813] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8 [ 9.539935] mpp_vepu2 fdbac000.jpege-core: probing start [ 9.539999] mpp_vepu2 fdbac000.jpege-core: attach ccu success [ 9.540057] mpp_vepu2 fdbac000.jpege-core: probing finish [ 9.540247] mpp-iep2 fdbb0000.iep: Adding to iommu group 9 [ 9.540370] mpp-iep2 fdbb0000.iep: probe device [ 9.540458] mpp-iep2 fdbb0000.iep: allocate roi buffer failed [ 9.540513] mpp-iep2 fdbb0000.iep: probing finish [ 9.540668] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4 [ 9.540850] mpp_jpgdec fdb90000.jpegd: probe device [ 9.540983] mpp_jpgdec fdb90000.jpegd: probing finish [ 9.541246] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start [ 9.541287] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish [ 9.541339] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12 [ 9.541558] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start [ 9.541634] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found! [ 9.541639] rkvdec2_init:1010: No niu aclk reset resource define [ 9.541643] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found! [ 9.541646] rkvdec2_init:1013: No niu hclk reset resource define [ 9.541660] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled [ 9.541703] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001 [ 9.541705] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0 [ 9.541833] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000 [ 9.541835] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000 [ 9.541836] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520 [ 9.541838] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576 [ 9.541840] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512 [ 9.541861] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish [ 9.541907] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13 [ 9.542103] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start [ 9.542178] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found! [ 9.542182] rkvdec2_init:1010: No niu aclk reset resource define [ 9.542185] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found! [ 9.542188] rkvdec2_init:1013: No niu hclk reset resource define [ 9.542202] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled [ 9.542232] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002 [ 9.542246] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1 [ 9.542394] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000 [ 9.542396] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000 [ 9.542398] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424 [ 9.542400] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576 [ 9.542402] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512 [ 9.542422] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish [ 9.542545] mpp_rkvenc2 rkvenc-ccu: probing start [ 9.542547] mpp_rkvenc2 rkvenc-ccu: probing finish [ 9.542631] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10 [ 9.542791] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start [ 9.542801] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8 [ 9.542900] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0 [ 9.542964] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish [ 9.543013] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11 [ 9.543215] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start [ 9.543224] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8 [ 9.543342] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1 [ 9.543414] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish [ 9.543616] mpp_av1dec: Adding child /av1d@fdc70000 [ 9.543765] mpp_av1dec: register device av1d-master [ 9.543915] mpp_av1dec av1d-master: probing start [ 9.543958] mpp_iommu_probe:434: failed to get device node [ 9.543962] mpp_av1dec av1d-master: failed to attach iommu [ 9.544047] mpp_av1dec av1d-master: probing finish [ 9.544069] mpp_service mpp-srv: probe success [ 9.549585] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 9.549589] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 9.550236] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 9.550239] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 9.550883] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 9.550886] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 9.551203] rockchip-pvtm fda40000.pvtm: pvtm@0 probed [ 9.551243] rockchip-pvtm fda50000.pvtm: pvtm@1 probed [ 9.551279] rockchip-pvtm fda60000.pvtm: pvtm@2 probed [ 9.551312] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed [ 9.551345] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed [ 9.551724] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 9.566516] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled [ 9.566939] feb50000.serial: ttyS0 at MMIO 0xfeb50000 (irq = 93, base_baud = 1500000) is a 16550A [ 9.655822] printk: console [ttyS0] enabled [ 9.656054] feb90000.serial: ttyS2 at MMIO 0xfeb90000 (irq = 94, base_baud = 1500000) is a 16550A [ 9.656283] febc0000.serial: ttyS1 at MMIO 0xfebc0000 (irq = 95, base_baud = 1500000) is a 16550A [ 9.657484] rockchip-vop2 fdd90000.vop: Adding to iommu group 16 [ 9.662783] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2 [ 9.662789] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3 [ 9.662798] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8 [ 9.662803] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9 [ 9.662808] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2 [ 9.662871] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster0-win0 as cursor plane for vp0 [ 9.662934] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster1-win0 as cursor plane for vp1 [ 9.662994] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster2-win0 as cursor plane for vp2 [ 9.663052] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster3-win0 as cursor plane for vp3 [ 9.663066] [drm] failed to init overlay plane Cluster0-win1 [ 9.663067] [drm] failed to init overlay plane Cluster1-win1 [ 9.663069] [drm] failed to init overlay plane Cluster2-win1 [ 9.663070] [drm] failed to init overlay plane Cluster3-win1 [ 9.670925] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc0116ba8e0) [ 9.671411] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver [ 9.671517] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0116c3128) [ 9.671546] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_bind] *ERROR* Failed to find panel or bridge: -517 [ 9.685587] panel-simple-dsi fde20000.dsi.0: supply power not found, using dummy regulator [ 9.687648] brd: module loaded [ 9.797634] rk-pcie fe190000.pcie: PCIe Link up, LTSSM is 0x30011 [ 9.797769] rk-pcie fe190000.pcie: PCI host bridge to bus 0004:40 [ 9.797779] pci_bus 0004:40: root bus resource [bus 40-4f] [ 9.797786] pci_bus 0004:40: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0] [ 9.797795] pci_bus 0004:40: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff]) [ 9.797802] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff] [ 9.797808] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff pref] [ 9.797843] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400 [ 9.797869] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 9.797930] pci 0004:40:00.0: supports D1 D2 [ 9.797936] pci 0004:40:00.0: PME# supported from D0 D1 D3hot [ 9.805800] pci 0004:40:00.0: Primary bus is hard wired to 0 [ 9.805808] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring [ 9.806033] pci 0004:41:00.0: [10ec:8168] type 00 class 0x020000 [ 9.806106] pci 0004:41:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 9.806114] pci 0004:41:00.0: reg 0x10: [io size 0x0100] [ 9.806201] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit] [ 9.806259] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit] [ 9.806702] pci 0004:41:00.0: supports D1 D2 [ 9.806708] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 9.821930] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41 [ 9.821961] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff] [ 9.821971] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref] [ 9.821978] pci 0004:40:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 9.821990] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4200000-0xf4203fff 64bit] [ 9.822041] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4204000-0xf4204fff 64bit] [ 9.822088] pci 0004:41:00.0: BAR 0: assigned [io 0x1000-0x10ff] [ 9.822107] pci 0004:40:00.0: PCI bridge to [bus 41] [ 9.822114] pci 0004:40:00.0: bridge window [io 0x1000-0x1fff] [ 9.822122] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff] [ 9.824619] pcieport 0004:40:00.0: PME: Signaling with IRQ 120 [ 9.837636] loop: module loaded [ 9.837804] zram: Added device: zram0 [ 9.837931] lkdtm: No crash points registered, enable through debugfs [ 9.838000] system_heap: orders[0] = 6 [ 9.838002] system_heap: orders[1] = 4 [ 9.838004] system_heap: orders[2] = 0 [ 9.838272] Loading iSCSI transport class v2.0-870. [ 9.838493] iscsi: registered transport (tcp) [ 9.839698] rockchip-spi feb00000.spi: no high_speed pinctrl state [ 9.840248] rockchip-spi feb20000.spi: no high_speed pinctrl state [ 9.841100] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1 [ 9.841214] rk806 spi2.0: ON: 0x40 OFF:0x0 [ 9.842531] vdd_gpu_s0: supplied by vcc5v0_sys [ 9.843490] vdd_cpu_lit_s0: supplied by vcc5v0_sys [ 9.844034] vdd_log_s0: supplied by vcc5v0_sys [ 9.844533] vdd_vdenc_s0: supplied by vcc5v0_sys [ 9.845069] vdd_ddr_s0: supplied by vcc5v0_sys [ 9.845389] vdd2_ddr_s3: supplied by vcc5v0_sys [ 9.845879] vdd_2v0_pldo_s3: supplied by vcc5v0_sys [ 9.846317] vcc_3v3_s3: supplied by vcc5v0_sys [ 9.846734] vddq_ddr_s0: supplied by vcc5v0_sys [ 9.847224] vcc_1v8_s3: supplied by vcc5v0_sys [ 9.847750] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3 [ 9.848246] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3 [ 9.848669] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3 [ 9.849102] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3 [ 9.849533] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3 [ 9.850032] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3 [ 9.850575] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3 [ 9.851126] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3 [ 9.851598] vcc_3v3_s0: supplied by vcc5v0_sys [ 9.852026] random: fast init done [ 9.852027] vccio_sd_s0: supplied by vcc5v0_sys [ 9.852467] pldo6_s3: supplied by vcc5v0_sys [ 9.852864] rk806 spi2.0: no sleep-setting state [ 9.857483] rk806 spi2.0: no reset-setting pinctrl state [ 9.862786] rk806 spi2.0: no dvs-setting pinctrl state [ 9.869697] CAN device driver interface [ 9.869998] r8168 Gigabit Ethernet driver 8.049.02-NAPI loaded [ 9.870029] r8168 0004:41:00.0: enabling device (0000 -> 0003) [ 9.886483] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 9.888534] r8168 Copyright (C) 2021 Realtek NIC software team This program comes with ABSOLUTELY NO WARRANTY; for details, please see . This is free software, and you are welcome to redistribute it under certain conditions; see . [ 9.889168] PPP generic driver version 2.4.2 [ 9.889220] PPP BSD Compression module registered [ 9.889222] PPP Deflate Compression module registered [ 9.889231] PPP MPPE Compression module registered [ 9.889234] NET: Registered protocol family 24 [ 9.889258] usbcore: registered new interface driver rtl8150 [ 9.889272] usbcore: registered new interface driver r8152 [ 9.896564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 9.896568] ehci-pci: EHCI PCI platform driver [ 9.896589] ehci-platform: EHCI generic platform driver [ 9.898741] ehci-platform fc800000.usb: EHCI Host Controller [ 9.898793] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 1 [ 9.898843] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000 [ 9.910953] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00 [ 9.911016] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 9.911019] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.911021] usb usb1: Product: EHCI Host Controller [ 9.911024] usb usb1: Manufacturer: Linux 5.10.110 ehci_hcd [ 9.911026] usb usb1: SerialNumber: fc800000.usb [ 9.911180] hub 1-0:1.0: USB hub found [ 9.911190] hub 1-0:1.0: 1 port detected [ 9.913443] ehci-platform fc880000.usb: EHCI Host Controller [ 9.913494] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2 [ 9.913535] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000 [ 9.924285] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00 [ 9.924338] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 9.924341] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.924343] usb usb2: Product: EHCI Host Controller [ 9.924345] usb usb2: Manufacturer: Linux 5.10.110 ehci_hcd [ 9.924347] usb usb2: SerialNumber: fc880000.usb [ 9.924477] hub 2-0:1.0: USB hub found [ 9.924485] hub 2-0:1.0: 1 port detected [ 9.924757] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 9.924762] ohci-platform: OHCI generic platform driver [ 9.924889] ohci-platform fc840000.usb: Generic Platform OHCI controller [ 9.924946] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3 [ 9.924979] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000 [ 9.985002] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 9.985005] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.985007] usb usb3: Product: Generic Platform OHCI controller [ 9.985009] usb usb3: Manufacturer: Linux 5.10.110 ohci_hcd [ 9.985011] usb usb3: SerialNumber: fc840000.usb [ 9.985144] hub 3-0:1.0: USB hub found [ 9.985153] hub 3-0:1.0: 1 port detected [ 9.985337] ohci-platform fc8c0000.usb: Generic Platform OHCI controller [ 9.985386] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 4 [ 9.985417] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000 [ 10.045000] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10 [ 10.045003] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.045006] usb usb4: Product: Generic Platform OHCI controller [ 10.045008] usb usb4: Manufacturer: Linux 5.10.110 ohci_hcd [ 10.045010] usb usb4: SerialNumber: fc8c0000.usb [ 10.045143] hub 4-0:1.0: USB hub found [ 10.045151] hub 4-0:1.0: 1 port detected [ 10.045539] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 10.045591] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5 [ 10.045671] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000082002010010 [ 10.045686] xhci-hcd xhci-hcd.4.auto: irq 126, io mem 0xfc000000 [ 10.045791] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 10.045794] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.045796] usb usb5: Product: xHCI Host Controller [ 10.045799] usb usb5: Manufacturer: Linux 5.10.110 xhci-hcd [ 10.045801] usb usb5: SerialNumber: xhci-hcd.4.auto [ 10.045932] hub 5-0:1.0: USB hub found [ 10.045941] hub 5-0:1.0: 1 port detected [ 10.046032] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller [ 10.046076] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6 [ 10.046083] xhci-hcd xhci-hcd.4.auto: Host supports USB 3.0 SuperSpeed [ 10.046106] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.046136] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 10.046139] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.046141] usb usb6: Product: xHCI Host Controller [ 10.046143] usb usb6: Manufacturer: Linux 5.10.110 xhci-hcd [ 10.046145] usb usb6: SerialNumber: xhci-hcd.4.auto [ 10.046267] hub 6-0:1.0: USB hub found [ 10.046275] hub 6-0:1.0: 1 port detected [ 10.046417] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 10.046466] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7 [ 10.046525] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000080002010010 [ 10.046541] xhci-hcd xhci-hcd.5.auto: irq 127, io mem 0xfcd00000 [ 10.046632] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 10.046634] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.046636] usb usb7: Product: xHCI Host Controller [ 10.046639] usb usb7: Manufacturer: Linux 5.10.110 xhci-hcd [ 10.046641] usb usb7: SerialNumber: xhci-hcd.5.auto [ 10.046763] hub 7-0:1.0: USB hub found [ 10.046773] hub 7-0:1.0: 1 port detected [ 10.046865] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller [ 10.046907] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8 [ 10.046911] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed [ 10.046928] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM. [ 10.046959] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 10.046962] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 10.046964] usb usb8: Product: xHCI Host Controller [ 10.046966] usb usb8: Manufacturer: Linux 5.10.110 xhci-hcd [ 10.046968] usb usb8: SerialNumber: xhci-hcd.5.auto [ 10.047097] hub 8-0:1.0: USB hub found [ 10.047104] hub 8-0:1.0: 1 port detected [ 10.047232] usbcore: registered new interface driver cdc_acm [ 10.047234] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 10.047313] usbcore: registered new interface driver uas [ 10.047355] usbcore: registered new interface driver usb-storage [ 10.047384] usbcore: registered new interface driver usbserial_generic [ 10.047392] usbserial: USB Serial support registered for generic [ 10.047404] usbcore: registered new interface driver ch341 [ 10.047410] usbserial: USB Serial support registered for ch341-uart [ 10.047423] usbcore: registered new interface driver cp210x [ 10.047429] usbserial: USB Serial support registered for cp210x [ 10.047455] usbcore: registered new interface driver ftdi_sio [ 10.047461] usbserial: USB Serial support registered for FTDI USB Serial Device [ 10.047532] usbcore: registered new interface driver keyspan [ 10.047540] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 10.047546] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 10.047551] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 10.047557] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 10.047572] usbcore: registered new interface driver option [ 10.047577] usbserial: USB Serial support registered for GSM modem (1-port) [ 10.047688] usbcore: registered new interface driver oti6858 [ 10.047694] usbserial: USB Serial support registered for oti6858 [ 10.047707] usbcore: registered new interface driver pl2303 [ 10.047714] usbserial: USB Serial support registered for pl2303 [ 10.047731] usbcore: registered new interface driver qcserial [ 10.047737] usbserial: USB Serial support registered for Qualcomm USB modem [ 10.047759] usbcore: registered new interface driver sierra [ 10.047765] usbserial: USB Serial support registered for Sierra USB modem [ 10.047782] usbcore: registered new interface driver keyspan_pda [ 10.047789] usbserial: USB Serial support registered for Keyspan PDA [ 10.047796] usbserial: USB Serial support registered for Xircom / Entrega PGS - (prerenumeration) [ 10.048325] usbcore: registered new interface driver iforce [ 10.048456] usbcore: registered new interface driver xpad [ 10.048510] usbcore: registered new interface driver usbtouchscreen [ 10.049338] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0 [ 10.049474] i2c /dev entries driver [ 10.052802] vdd_cpu_big0_s0: supplied by vcc5v0_sys [ 10.061220] vdd_cpu_big1_s0: supplied by vcc5v0_sys [ 10.070107] vdd_npu_s0: supplied by vcc5v0_sys [ 10.075926] tinker-mcu: tinker_mcu_probe: address = 0x45 [ 10.075932] tinker-mcu: send_cmds: 80 [ 10.127633] tinker-mcu: init_cmd_check: recv_cmds: 0xC3 [ 10.127710] tinker-mcu: tinker_mcu_screen_power_off: [ 10.127714] tinker-mcu: send_cmds: 8500 [ 10.160950] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 10.171232] tinker-ft5406: tinker_ft5406_probe: address = 0x38 [ 10.171240] tinker-ft5406: tinker_ft5406_probe: width = 800, height = 480, reverse = 1 [ 10.171373] input: fts_ts as /devices/platform/feac0000.i2c/i2c-4/4-0038/input/input1 [ 10.173967] rtc-hym8563 6-0051: rtc information is valid [ 10.179167] rtc-hym8563 6-0051: registered as rtc0 [ 10.184796] rkcifhw fdce0000.rkcif: Adding to iommu group 15 [ 10.185292] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF [ 10.185436] rkcif rkcif-mipi-lvds2: Adding to iommu group 15 [ 10.185468] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a [ 10.185557] rkcif rkcif-mipi-lvds2: attach to cif hw node [ 10.185563] rkcif rkcif-mipi-lvds2: rkcif wait line 0 [ 10.185571] : terminal subdev does not exist [ 10.189868] : terminal subdev does not exist [ 10.194147] : terminal subdev does not exist [ 10.198425] : terminal subdev does not exist [ 10.202703] : get_remote_sensor: video pad[0] is null [ 10.207759] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 10.214983] : get_remote_sensor: video pad[0] is null [ 10.220038] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 10.227262] : get_remote_sensor: video pad[0] is null [ 10.232318] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 10.239539] : get_remote_sensor: video pad[0] is null [ 10.244596] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed! [ 10.252436] rkcif rkcif-mipi-lvds2: No memory-region-thunderboot specified [ 10.253084] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized! [ 10.253088] rockchip-mipi-csi2: Async registered subdev [ 10.258320] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2! [ 10.258785] rkisp_hw fdcb0000.rkisp: Adding to iommu group 14 [ 10.258943] rkisp_hw fdcb0000.rkisp: is_thunderboot: 0 [ 10.258946] rkisp_hw fdcb0000.rkisp: max input:0x0@0fps [ 10.258949] rkisp_hw fdcb0000.rkisp: Missing rockchip,grf property [ 10.259013] rkisp_hw fdcb0000.rkisp: no find phandle sram [ 10.259175] rkisp rkisp0-vir0: rkisp driver version: v02.00.00 [ 10.259275] rkisp rkisp0-vir0: Entity type for entity rkisp-isp-subdev was not initialized! [ 10.260153] usbcore: registered new interface driver uvcvideo [ 10.260155] USB Video Class driver (1.1.1) [ 10.261209] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property [ 10.261662] rockchip-thermal fec00000.tsadc: tsadc is probed successfully! [ 10.261874] Bluetooth: HCI UART driver ver 2.3 [ 10.261877] Bluetooth: HCI UART protocol H4 registered [ 10.261879] Bluetooth: HCI UART protocol ATH3K registered [ 10.261901] usbcore: registered new interface driver bfusb [ 10.261920] usbcore: registered new interface driver btusb [ 10.262471] cpu cpu0: bin=0 [ 10.262640] cpu cpu0: leakage=8 [ 10.264032] cpu cpu0: pvtm=1412 [ 10.264088] cpu cpu0: pvtm-volt-sel=1 [ 10.265949] cpu cpu1: bin=0 [ 10.266115] cpu cpu1: leakage=7 [ 10.272546] cpu cpu1: pvtm=1658 [ 10.276442] cpu cpu1: pvtm-volt-sel=3 [ 10.279048] cpu cpu3: bin=0 [ 10.279213] cpu cpu3: leakage=7 [ 10.285659] cpu cpu3: pvtm=1659 [ 10.289569] cpu cpu3: pvtm-volt-sel=3 [ 10.291042] cpu cpu0: avs=0 [ 10.291611] cpu cpu1: avs=0 [ 10.292168] cpu cpu3: avs=0 [ 10.292291] cpu cpu0: EM: OPP:600000 is inefficient [ 10.292293] cpu cpu0: EM: OPP:408000 is inefficient [ 10.292354] cpu cpu0: EM: created perf domain [ 10.292384] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0 [ 10.292954] cpu cpu1: EM: OPP:816000 is inefficient [ 10.292956] cpu cpu1: EM: OPP:600000 is inefficient [ 10.293041] cpu cpu1: EM: created perf domain [ 10.293063] cpu cpu1: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 [ 10.294292] usb 5-1: new full-speed USB device number 2 using xhci-hcd [ 10.307126] cpu cpu3: EM: OPP:816000 is inefficient [ 10.307127] cpu cpu3: EM: OPP:600000 is inefficient [ 10.307175] cpu cpu3: EM: created perf domain [ 10.307330] cpu cpu3: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0 [ 10.308240] usb 1-1: New USB device found, idVendor=1a86, idProduct=8091, bcdDevice= 1.21 [ 10.308243] usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 10.308246] usb 1-1: Product: USB HUB [ 10.308530] hub 1-1:1.0: USB hub found [ 10.308611] hub 1-1:1.0: 4 ports detected [ 10.321851] sdhci: Secure Digital Host Controller Interface driver [ 10.321852] sdhci: Copyright(c) Pierre Ossman [ 10.321853] Synopsys Designware Multimedia Card Interface Driver [ 10.322009] sdhci-pltfm: SDHCI platform and OF driver helper [ 10.322176] dwmmc_rockchip fe2d0000.mmc: IDMAC supports 32-bit address mode. [ 10.322183] dwmmc_rockchip fe2d0000.mmc: Using internal DMA controller. [ 10.322186] dwmmc_rockchip fe2d0000.mmc: Version ID is 270a [ 10.322197] dwmmc_rockchip fe2d0000.mmc: DW MMC controller at irq 80,32 bit host data width,256 deep fifo [ 10.322261] dwmmc_rockchip fe2d0000.mmc: allocated mmc-pwrseq [ 10.322264] mmc_host mmc1: card is non-removable. [ 10.322390] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active. [ 10.329113] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 10.329482] cryptodev: driver 1.12 loaded. [ 10.329493] hid: raw HID events driver (C) Jiri Kosina [ 10.329618] usbcore: registered new interface driver usbhid [ 10.329619] usbhid: USB HID core driver [ 10.329747] ashmem: initialized [ 10.331117] optee: probing for conduit method. [ 10.331125] optee: revision 3.13 (4542e1ef) [ 10.331367] optee: initialized driver [ 10.331655] usbcore: registered new interface driver snd-usb-audio [ 10.332011] es8316 7-0010: Can not read property spk_ctl_gpio [ 10.332014] es8316 7-0010: Can not read property hp_det_gpio [ 10.333513] debugfs: File 'Capture' in directory 'dapm' already present! [ 10.341140] input: rockchip,dp0 rockchip,dp0 as /devices/platform/dp0-sound/sound/card0/input2 [ 10.341570] Initializing XFRM netlink socket [ 10.341671] NET: Registered protocol family 10 [ 10.342000] Segment Routing with IPv6 [ 10.342015] NET: Registered protocol family 17 [ 10.342019] NET: Registered protocol family 15 [ 10.342027] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 10.342028] can: controller area network core [ 10.342038] NET: Registered protocol family 29 [ 10.342039] can: raw protocol [ 10.342040] can: broadcast manager protocol [ 10.342042] can: netlink gateway - max_hops=1 [ 10.342210] Bluetooth: RFCOMM TTY layer initialized [ 10.342213] Bluetooth: RFCOMM socket layer initialized [ 10.342217] Bluetooth: RFCOMM ver 1.11 [ 10.342222] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 10.342223] Bluetooth: HIDP socket layer initialized [ 10.342377] 8021q: 802.1Q VLAN Support v1.8 [ 10.342397] [BT_RFKILL]: Enter rfkill_rk_init [ 10.342399] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 10.342509] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 10.342517] [WLAN_RFKILL]: can't find rockchip,grf property [ 10.342518] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6256 [ 10.342519] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 10.342521] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 10.342528] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 0, flags = 0. [ 10.342531] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 10.342532] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 10.342534] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1 [ 10.342535] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 10.342684] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 122. [ 10.342689] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 27. [ 10.342691] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 22. [ 10.342693] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 21. [ 10.342706] [BT_RFKILL]: Request irq for bt wakeup host [ 10.342729] [BT_RFKILL]: ** disable irq [ 10.342757] [BT_RFKILL]: bt_default device registered. [ 10.342775] Key type dns_resolver registered [ 10.342945] registered taskstats version 1 [ 10.342949] Loading compiled-in X.509 certificates [ 10.342957] Key type ._fscrypt registered [ 10.342958] Key type .fscrypt registered [ 10.342959] Key type fscrypt-provisioning registered [ 10.343197] Btrfs loaded, crc32c=crc32c-generic, assert=on, integrity-checker=on, ref-verify=on [ 10.343273] pstore: Using crash dump compression: deflate [ 10.343351] rga3_core0 fdb60000.rga: Adding to iommu group 2 [ 10.343453] rga: rga3_core0, irq = 32, match scheduler [ 10.343598] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831. [ 10.343614] rga: rga3_core0 probe successfully [ 10.343701] rga3_core1 fdb70000.rga: Adding to iommu group 3 [ 10.343784] rga: rga3_core1, irq = 33, match scheduler [ 10.343921] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831. [ 10.343937] rga: rga3_core1 probe successfully [ 10.344018] rga: rga2, irq = 34, match scheduler [ 10.344150] rga: rga2 hardware loaded successfully, hw_version:3.2.63318. [ 10.344153] rga: rga2 probe successfully [ 10.344199] rga_iommu: IOMMU binding successfully, default mapping core[0x1] [ 10.344277] rga: Module initialized. v1.2.23 [ 10.351049] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA [ 10.354368] mali fb000000.gpu: Kernel DDK version g15p0-01eac0 [ 10.354759] mali fb000000.gpu: bin=0 [ 10.354921] mali fb000000.gpu: leakage=12 [ 10.354932] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present! [ 10.364842] mali fb000000.gpu: pvtm=877 [ 10.364855] mali fb000000.gpu: pvtm-volt-sel=3 [ 10.365056] mali fb000000.gpu: avs=0 [ 10.365084] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available. [ 10.365577] mali fb000000.gpu: GPU hardware issue table may need updating: r0p0 status 5 is unknown; treating as r0p0 status 0 [ 10.365579] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0 [ 10.365603] mali fb000000.gpu: No priority control manager is configured [ 10.365813] mali fb000000.gpu: No memory group manager is configured [ 10.365824] mali fb000000.gpu: Protected memory allocator not available [ 10.366036] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT [ 10.366479] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model' [ 10.366482] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0] [ 10.366520] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0] [ 10.366554] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0] [ 10.366587] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = '' [ 10.367088] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model [ 10.367135] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 [ 10.367556] mali fb000000.gpu: Probed as mali0 [ 10.407341] mmc0: Host Software Queue enabled [ 10.407349] mmc0: new HS400 MMC card at address 0001 [ 10.407813] mmcblk0: mmc0:0001 AT2S9D 116 GiB [ 10.407943] mmcblk0boot0: mmc0:0001 AT2S9D partition 1 4.00 MiB [ 10.408062] mmcblk0boot1: mmc0:0001 AT2S9D partition 2 4.00 MiB [ 10.408222] mmcblk0rpmb: mmc0:0001 AT2S9D partition 3 4.00 MiB, chardev (238:0) [ 10.409236] mmcblk0: p1 p2 [ 10.441075] usb 5-1: New USB device found, idVendor=1997, idProduct=2433, bcdDevice= 1.06 [ 10.441079] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.441082] usb 5-1: Product: mini keyboard [ 10.441085] usb 5-1: Manufacturer: [ 10.464766] input: mini keyboard as /devices/platform/usbdrd3_0/fc000000.usb/xhci-hcd.4.auto/usb5/5-1/5-1:1.0/0003:1997:2433.0001/input/input3 [ 10.521541] hid-generic 0003:1997:2433.0001: input,hidraw0: USB HID v1.11 Keyboard [ mini keyboard] on usb-xhci-hcd.4.auto-1/input0 [ 10.524843] input: mini keyboard Mouse as /devices/platform/usbdrd3_0/fc000000.usb/xhci-hcd.4.auto/usb5/5-1/5-1:1.1/0003:1997:2433.0002/input/input4 [ 10.525074] input: mini keyboard System Control as /devices/platform/usbdrd3_0/fc000000.usb/xhci-hcd.4.auto/usb5/5-1/5-1:1.1/0003:1997:2433.0002/input/input5 [ 10.541089] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 10.554343] combophy_avdd0v85: supplied by vdd_0v85_s0 [ 10.554863] combophy_avdd1v8: supplied by avcc_1v8_s0 [ 10.555409] vcc3v3_lcd0_n: supplied by vcc_3v3_s0 [ 10.556034] vcc_mipidphy0: supplied by vcc_3v3_s3 [ 10.556469] vcc_3v3_sd_s0: supplied by vcc_3v3_s3 [ 10.559972] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2 [ 10.559979] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3 [ 10.559991] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8 [ 10.559997] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9 [ 10.560008] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -2 [ 10.560093] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster0-win0 as cursor plane for vp0 [ 10.560172] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster1-win0 as cursor plane for vp1 [ 10.560248] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster2-win0 as cursor plane for vp2 [ 10.560323] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] Cluster3-win0 as cursor plane for vp3 [ 10.560338] [drm] failed to init overlay plane Cluster0-win1 [ 10.560340] [drm] failed to init overlay plane Cluster1-win1 [ 10.560342] [drm] failed to init overlay plane Cluster2-win1 [ 10.560344] [drm] failed to init overlay plane Cluster3-win1 [ 10.566354] mmc1: queuing unknown CIS tuple 0x10 (5 bytes) [ 10.572928] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 10.573786] mmc1: queuing unknown CIS tuple 0x10 (5 bytes) [ 10.575936] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc0116ba8e0) [ 10.576849] mmc1: new SDIO card at address e9ea [ 10.576970] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver [ 10.577089] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0116c3128) [ 10.577104] rockchip-drm display-subsystem: bound fde20000.dsi (ops 0xffffffc0116c5358) [ 10.577135] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc0116c56e8) [ 10.577697] rockchip-drm display-subsystem: route-dsi0: failed to get logo,offset [ 10.581291] input: mini keyboard Consumer Control as /devices/platform/usbdrd3_0/fc000000.usb/xhci-hcd.4.auto/usb5/5-1/5-1:1.1/0003:1997:2433.0002/input/input6 [ 10.585191] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes [ 10.585533] hid-generic 0003:1997:2433.0002: input,hidraw1: USB HID v1.11 Mouse [ mini keyboard] on usb-xhci-hcd.4.auto-1/input1 [ 10.593017] rockchip-drm display-subsystem: can't not find any logo display [ 10.593019] rockchip-drm display-subsystem: failed to show kernel logo [ 10.600420] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 800x480p61, type: 16(if:20) for vp3 dclk: 25000000 [ 10.600543] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] dclk_out3 div: 2 dclk_core3 div: 2 [ 10.600549] rockchip-vop2 fdd90000.vop: [drm:vop2_crtc_atomic_enable] set dclk_vop3 to 25000000, get 25000000 [ 10.603885] jx:enter panel simple prepare!! [ 10.603887] tinker-mcu: tinker_mcu_screen_power_up: [ 10.603888] tinker-mcu: send_cmds: 8501 [ 10.627706] tinker-mcu: send_cmds: 8104 [ 10.762596] tinker-ft5406: fts_check_fw_ver: Firmware version = 11.0.0 [ 11.124336] rockchip-pinctrl pinctrl: pin gpio1-15 already requested by fe4f0000.spdif-tx; cannot claim for febf0010.pwm [ 11.124337] rockchip-pinctrl pinctrl: pin-47 (febf0010.pwm) status -22 [ 11.124340] rockchip-pinctrl pinctrl: could not request pin 47 (gpio1-15) from group pwm13m2-pins on device rockchip-pinctrl [ 11.124341] rockchip-pwm febf0010.pwm: Error applying setting, reverse things back [ 11.124346] dw-mipi-dsi2 fde20000.dsi: [drm:dw_mipi_dsi2_encoder_enable] final DSI-Link bandwidth: 333333 x 2 Kbps [ 11.124356] rockchip-vop2 fdd90000.vop: pd7 get ref_count:0 [ 11.124357] rockchip-vop2 fdd90000.vop: pd7 on [ 11.125483] Console: switching to colour frame buffer device 100x30 [ 11.178711] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 11.179431] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0 [ 11.179557] input: adc-keys as /devices/platform/adc-keys/input/input7 [ 11.179987] imx219 8-0010: driver version: 00.01.02 [ 11.179996] imx219 8-0010: Failed to get reset-gpios [ 11.180000] imx219 8-0010: Failed to get power-gpios [ 11.180003] imx219 8-0010: Failed to get pwdn-gpios [ 11.180005] imx219 8-0010: imx219_video_probe [ 11.180006] imx219 8-0010: imx219 power on [ 11.267713] imx219 8-0010: xvclk matched OK [ 11.298007] imx219 8-0010: Reading register test 0 from 10 failed [ 11.298008] imx219 8-0010: Failure to read Model ID (high byte) [ 11.303919] imx219 8-0010: imx219 power off [ 11.334120] imx477 8-001a: supply VANA not found, using dummy regulator [ 11.334152] imx477 8-001a: supply VDIG not found, using dummy regulator [ 11.334161] imx477 8-001a: supply VDDL not found, using dummy regulator [ 11.343528] imx477 8-001a: failed to read chip id 477, with error -5 [ 11.349955] imx477: probe of 8-001a failed with error -5 [ 11.482767] debugfs: File 'Left Hp mixer' in directory 'dapm' already present! [ 11.489985] debugfs: File 'Right Hp mixer' in directory 'dapm' already present! [ 11.497283] debugfs: File 'HPCP L' in directory 'dapm' already present! [ 11.503886] debugfs: File 'HPCP R' in directory 'dapm' already present! [ 11.510488] debugfs: File 'HPVOL L' in directory 'dapm' already present! [ 11.517174] debugfs: File 'HPVOL R' in directory 'dapm' already present! [ 11.525875] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card2/input8 [ 11.526174] ov5648 8-0036: driver version: 00.01.05 [ 11.526182] ov5648 8-0036: Failed to get power-gpios, maybe no use [ 11.526186] ov5648 8-0036: Failed to get reset-gpios, maybe no use [ 11.526189] ov5648 8-0036: Failed to get pwdn-gpios [ 11.526226] ov5648 8-0036: supply dovdd not found, using dummy regulator [ 11.526245] ov5648 8-0036: supply dvdd not found, using dummy regulator [ 11.526254] ov5648 8-0036: lane_num(2) pixel_rate(84000000) [ 11.526256] ov5648 8-0036: could not get default pinstate [ 11.531647] ov5648 8-0036: could not get sleep pinstate [ 11.539891] ov5648 8-0036: Unexpected sensor id(000000), ret(-5) [ 11.545889] ov5648 8-0036: ov5648_probe(1587) Check id failed check following information: Power/PowerDown/Reset/Mclk/I2cBus !! [ 11.546353] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 11.546362] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 11.546367] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 11.546381] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 79,32 bit host data width,256 deep fifo [ 11.546567] rkcif rkcif-mipi-lvds2: clear unready subdev num: 3 [ 11.546570] rockchip-csi2-dphy0: No link between dphy and sensor [ 11.546773] rockchip-csi2-dphy0: No link between dphy and sensor [ 11.546783] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 11.555907] rkcif-mipi-lvds2: Async subdev notifier completed [ 11.555908] rockchip-csi2-dphy0: No link between dphy and sensor [ 11.555911] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 11.565027] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP [ 11.565108] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 11.572842] rockchip-csi2-dphy0: No link between dphy and sensor [ 11.572852] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 11.573063] rockchip_headset rk-headset: Can not read property headset_gpio [ 11.581966] rkcif-mipi-lvds2: There is not terminal subdev, not synchronized with ISP [ 11.596725] rockchip_headset: probe of rk-headset failed with error -2 [ 11.596803] RKNPU fdab0000.npu: Adding to iommu group 0 [ 11.596872] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode [ 11.598041] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff] [ 11.606565] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff] [ 11.615078] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff] [ 11.623910] [drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1 [ 11.627112] RKNPU fdab0000.npu: bin=0 [ 11.627275] RKNPU fdab0000.npu: leakage=7 [ 11.627291] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present! [ 11.631130] mmc_host mmc2: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0) [ 11.642817] RKNPU fdab0000.npu: pvtm=868 [ 11.647127] RKNPU fdab0000.npu: pvtm-volt-sel=3 [ 11.647341] RKNPU fdab0000.npu: avs=0 [ 11.647395] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0 [ 11.652709] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 221 [ 11.652714] mmc2: new ultra high speed SDR104 SDHC card at address 5048 [ 11.653065] mmcblk2: mmc2:5048 SD32G 29.7 GiB [ 11.653887] mmcblk2: p1 [ 11.657303] RKNPU fdab0000.npu: failed to find power_model node [ 11.663215] RKNPU fdab0000.npu: RKNPU: failed to initialize power model [ 11.669815] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient [ 11.676954] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.684001] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.684393] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 11.684395] cfg80211: failed to load regulatory.db [ 11.684564] rockchip-pm rockchip-suspend: not set pwm-regulator-config [ 11.684883] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '08:55:53', on 'Jun 13 2023'. [ 11.684961] Mali: [ 11.684962] Mali device driver loaded [ 11.684965] rkisp rkisp0-vir0: clear unready subdev num: 1 [ 11.685133] rkisp0-vir0: Async subdev notifier completed [ 11.685136] ALSA device list: [ 11.685138] #0: rockchip,dp0 [ 11.685139] #1: rockchip,es8316-codec [ 11.685140] #2: rockchip-hdmi0 [ 11.685264] dw-apb-uart feb50000.serial: forbid DMA for kernel console [ 11.687269] Freeing unused kernel memory: 7360K [ 11.734455] Run /init as init process [ 11.734459] with arguments: [ 11.734460] /init [ 11.734461] splash [ 11.734462] with environment: [ 11.734463] HOME=/ [ 11.734464] TERM=linux [ 11.734465] rtleth=ethaddr:e6:22:d0:dd:bc:6f [ 12.217562] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 12.370586] systemd[1]: System time before build time, advancing clock. [ 12.527340] random: systemd: uninitialized urandom read (16 bytes read) [ 12.527885] random: systemd: uninitialized urandom read (16 bytes read) [ 12.528075] random: systemd: uninitialized urandom read (16 bytes read) [ 12.623785] systemd-journald[520]: Received client request to flush runtime journal. [ 12.627975] systemd-journald[520]: File /var/log/journal/fe56655fe5234110a2983707a12d9891/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 12.875386] aicbsp_init [ 12.875389] RELEASE_DATE:2022_0907_1948 [ 12.875593] aicbsp: aicbsp_set_subsys, subsys: AIC_WIFI, state to: 1 [ 12.875594] aicbsp: aicbsp_set_subsys, power state change to 1 dure to AIC_WIFI [ 12.875594] aicbsp: aicbsp_platform_power_on [ 12.877927] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.877946] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.877981] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 12.877993] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 12.878392] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.878400] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 12.878401] stream_cif_mipi_id3: update sensor info failed -19 [ 12.879486] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.879495] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 12.879496] rkcif_tools_id0: update sensor info failed -19 [ 12.880119] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.880127] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 12.880128] rkcif_tools_id1: update sensor info failed -19 [ 12.887150] rkcif_tools_id2: update sensor info failed -19 [ 12.895073] aicbsp: aicbsp_sdio_probe:1 vid:0x5449 did:0x0145 [ 12.895219] aicbsp: aicbsp_sdio_probe:2 vid:0x544A did:0x0146 [ 12.895220] aicbsp: aicbsp_sdio_probe after replace:1 [ 12.895568] aicbsp: Set SDIO Clock 50 MHz [ 12.896254] stream_cif_mipi_id0: update sensor info failed -19 [ 12.896332] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.898206] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.898233] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[3] get remote terminal sensor failed! [ 12.898234] rkcif_scale_ch3: update sensor info failed -19 [ 12.898376] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.898386] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 12.898387] rkcif_scale_ch1: update sensor info failed -19 [ 12.899726] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.899740] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[1] get remote terminal sensor failed! [ 12.899740] stream_cif_mipi_id1: update sensor info failed -19 [ 12.902464] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.902502] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[0] get remote terminal sensor failed! [ 12.902504] rkcif_scale_ch0: update sensor info failed -19 [ 12.915451] rockchip-csi2-dphy0: No link between dphy and sensor [ 12.921115] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 12.926104] rkcif-mipi-lvds2: rkcif_update_sensor_info: stream[2] get remote terminal sensor failed! [ 12.935201] rkcif_scale_ch2: update sensor info failed -19 [ 12.936633] aicbsp: aicbsp_driver_fw_init, chip rev: 7 [ 12.940725] stream_cif_mipi_id2: update sensor info failed -19 [ 12.951491] [BT_RFKILL]: bt shut off power [ 12.962222] rwnx_load_firmware :firmware path = /lib/firmware/fw_adid_u03.bin [ 13.042835] file md5:cf3ee68167beda73aaa5cb7a17169b4d [ 13.043258] rwnx_load_firmware :firmware path = /lib/firmware/fw_patch_u03.bin [ 13.044050] file md5:9e6e7077ac3ad39d71be92e5d0ee573a [ 13.056409] rwnx_load_firmware :firmware path = /lib/firmware/fw_patch_table_u03.bin [ 13.056733] file md5:895a24a6d9231ea6347a2938f208b178 [ 13.069840] aicbt_patch_table_load bt uart_baud:1500000 [ 13.069843] aicbt_patch_table_load bt uart_flowctrl:1 [ 13.069844] aicbt_patch_table_load bt lpm_enable:0 [ 13.069844] aicbt_patch_table_load bt tx_pwr:24608 [ 13.078031] aicbsp: bt patch version: - Sep 06 2022 18:21:39 - git 17b24d4 [ 13.078051] rwnx_load_firmware :firmware path = /lib/firmware/fmacfw.bin [ 13.080454] file md5:469e0b58dd18bfaba71c8681f039f053 [ 13.171047] aicbsp: sdio_err:: bus down [ 13.335462] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 13.583080] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1 [ 13.583642] ieee80211 phy0: ******************************************************* ** CAUTION: USING PERMISSIVE CUSTOM REGULATORY RULES ** ******************************************************* [ 13.797408] random: crng init done [ 13.797416] random: 7 urandom warning(s) missed due to ratelimiting [ 13.835176] of_dma_request_slave_channel: dma-names property of node '/serial@febc0000' missing or empty [ 13.844664] dw-apb-uart febc0000.serial: failed to request DMA, use interrupt mode [ 13.952653] eth0: 0xffffffc0133f5000, e6:22:d0:dd:bc:6f, IRQ 125 [ 14.012673] aicwf_sdio mmc1:e9ea:1 wlan0: CLOSE [ 14.013686] rwnx_send_msg1 (9)MM_REMOVE_IF_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 14.015286] ieee80211 phy0: HT supp 1, VHT supp 1, HE supp 1 [ 14.024615] aicwf_sdio mmc1:e9ea:1 wlan1: CLOSE [ 14.025625] rwnx_send_msg1 (9)MM_REMOVE_IF_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 14.101412] rwnx_virtual_interface_add: 10, p2p-dev-wlan0 [ 14.101417] rwnx_virtual_interface_add, ifname=p2p-dev-wlan0, wdev=000000004d72172a, vif_idx=2 [ 14.101419] p2p dev addr=e0 75 26 66 38 ff [ 14.108429] P2P interface started [ 14.838274] dma-pl330 fea30000.dma-controller: pl330_submit_req:1737 Try increasing mcbufsz (258/256) [ 14.838282] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(2) [ 15.191331] mali fb000000.gpu: Loading Mali firmware 0x1010000 [ 15.192402] mali fb000000.gpu: Mali firmware git_sha: 9b8db9aa05a7b4f3066fd75dbdff695262f891fe [ 15.568476] rockchip-vop2 fdd90000.vop: pd3 get ref_count:0 [ 15.568479] rockchip-vop2 fdd90000.vop: pd0 get ref_count:0 [ 15.568481] rockchip-vop2 fdd90000.vop: pd0 on [ 15.568501] rockchip-vop2 fdd90000.vop: pd3 on [ 17.053886] r8168: eth0: link up [ 17.053920] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.287059] aicwf_sdio mmc1:e9ea:1 wlan1: CLOSE [ 17.287074] rwnx_send_msg1 (9)MM_REMOVE_IF_CFM reqcfm:1 in_irq:0 in_softirq:0 in_atomic:0 [ 18.895132] rwnx_send_sm_connect_req drv_vif_index:1 connect to VY-WIFI(7) channel:5180 auth_type:0 [ 19.011250] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 20.616054] rockchip-vop2 fdd90000.vop: pd7 put ref_count:1 [ 20.616058] rockchip-vop2 fdd90000.vop: pd7 off [ 20.630318] rockchip-vop2 fdd90000.vop: pd7 get ref_count:0 [ 20.630322] rockchip-vop2 fdd90000.vop: pd7 on [ 22.590282] flush:tid=6 [ 22.701880] flush:tid=0 [ 23.634407] systemd-journald[520]: File /var/log/journal/fe56655fe5234110a2983707a12d9891/user-1000.journal corrupted or uncleanly shut down, renaming and replacing. [ 23.715846] dma-pl330 fea30000.dma-controller: pl330_submit_req:1737 Try increasing mcbufsz (258/256) [ 23.715855] dma-pl330 fea30000.dma-controller: fill_queue:2263 Bad Desc(3)