Posts made by george

@阿里 这个系统已经正常启动。两个HDMI接口可以交换测试。

@阿里 跑的什么系统，另外注意电源功率是否够。

@Albert 123

@qys2022
RS这颗物料市场上很少能买到样品，你可以用如下链接的替换型号，功能和PIN定义完全一致：
https://item.szlcsc.com/213171.html

@顾子韵_w
这款用的是COOLPI CM5的核心板，不兼容第三方的。

@anernest

• This screen CM5 can be supported, and you need to create a separate adapter board or adapter cable to be compatible with its PIN sequence.

• The DSI interface of CM5 is shown below, including 2 sets of independent 4LINE DSI channels, 2 sets of I2C interfaces, etc., which can simultaneously drive two DSI interfaces for LCD, with a resolution of 2560 * 1600

• It should be noted that the level of some IO is 1.8V, which requires a level conversion circuit to 3.3V.

@Albert
问题1：uboot是否开源并且支持修改调试? github上有uboot源码，支持修改调试。https://github.com/orgs/yanyitech/repositories
问题2：设备树dts是否开源，比如我可以挂载一个slave到i2c控制器上，我可以在设备树上添加； 内核代码也是开源的，支持修改。

问题3：CM5原厂有没有维护一个linux kernel版本，如果有的话，是否提供；Github上面有

问题4：想使用nfs挂载根文件系统，有没有相关的文档教程之类的；这个自行网络搜索解决。

@Albert 可以的。

@Albert
1.电源是配器可以选择标准的TYPEC是配器，支持12V/1.5A以上输出功率。
2.可以支持uefi,，目前EVB的机器支持nvme 2242规格的SSD.可以把系统安装到ssd或者标准SATA硬盘里边。

@anernest
Thank you for your support. We will cooperate and support any issues that may arise in the future. And if you choose an LCD, you can also send it to us to confirm if it is supported.

@anernest
Thank you for your suggestion. We will consider supporting you in the future.

@etrin
You can obtain the version of CP310 from the following website.
https://download.pytorch.org/whl/cpu/torch_stable.html

@etrin
This is related to the system's Python. If using ubuntu22.04, the Python version is 3.10. You can also try lowering the system's Python version, but it may cause other issues.

@anernest
Please provide the specifications of the monitor and the PIN definition of the interface, and we will evaluate whether it can be supported？

@qys2022 PCIE差分对NP可以交叉的，控制器会自动识别。

@Momo-0
There is no abnormal log information found in the dmesg information. Do you have any USB to serial port tools in your hand, and do you have some hands-on skills, such as welding and debugging serial ports. If further debugging information needs to be obtained, it is necessary to capture the logs of the serial port sleep wake up section to confirm the direction of the problem.

@anernest
This product is designed for enthusiasts and is very suitable for DIY users to develop, assemble, and build their own. Currently, after dismantling the machine, they do not enjoy after-sales policies. However, various accessories of the machine, including motherboards, core board and shell materials, can be sold separately for secondary sales. And we have a dedicated team to assist users in solving various problems in use and design. Notebook products are an extension of the CM5 core board, and currently there is no separate theme in the community. If you have any questions, you can directly post them under the CM5 theme. Thank you for your support.

• The latest laptop motherboard design has changed the WiFi section to a standard M2 interface, making it easy for users to replace according to different needs. Early machines can also be upgraded by replacing the motherboard.
  
  
  

@Momo-0
After booting up, print a dmesg message and send it out. I think this should be a single machine issue. Normally, our machine does not have this problem.

@Momo-0
Configure according to the factory's configuration (both the file system and kernel are placed in EMMC, while nvme only serves as a data disk). Is there a problem with suspend?

@etrin Has the problem been solved now？

@Mz3D-0
Sorry, The typec port of cp4 machine only support power input and cannot support power output and dp output.
You can pay attention to CM5's laptop products,which come with a standard TYPEC interface and support ALT mode to output power and display port output simultaneously.
https://www.cool-pi.com/assets/uploads/files/1699189432516-主图英文版.png

@etrin
Do you have a USB to serial port tool? If you can provide a startup log, it will be more convenient for us to analyze and solve the problem. Based on the current description, the possibility of insufficient power supply is relatively high. It is recommended to replace the TYPEC adapter before testing.

@etrin
Please refer to the following document to configure the NPU environment for CM5 and test it.

https://www.cool-pi.com/topic/288/quickly-build-an-rknn-environment?_=1699186747376

@etrin
Is the phenomenon of constantly restarting after upgrading the image? Have you seen the startup logo image? If the power adapter is constantly restarted, it is highly likely to be a problem. It is recommended to replace it with an adapter that supports the PD/QC protocol for testing.

@ngavarta
In the early stage, there was a plan to use a copper tube heat sink as shown in the figure below for heat dissipation between the CM5 and the fan. Later, the machines shipped were changed to passive graphite copper sheet heat dissipation.
Copper tube radiator：

Graphene+copper sheet radiator：

Temperature test data:

@etrin
Provide the full name of the image.

@LinuxRk3588
rtlinux我记得内核有个补丁包，可以自己测试一下。我们暂时没有适配计划。

@LinuxRk3588
ubuntu直接安装ROS2就可以了。见如下文档：
https://forum.cool-pi.com/topic/71/ubuntu22-04一键安装ros2环境?_=1698911528085

@Momo-0
Is firmware stored in EMMC or NVME?